BookTitleOkabe Product Catalog

Summary

Okabe Product Catalog

◆Application◆Name of component parts◆How to use◆Parts● All foundation construction● For Buildings: footing beam, footing,strip footing, mat foundation, pressureresistingboard, concrete stopper, etc.● For Civil engineering construction: pillarfoundation, retaining wall, concrete block,construction joint, etc.● For other construction: steel towerfoundation, wind turbine tower foundation.turbine tower foundationFeatures● Efficient formwork installation　 Fully-systemized component parts of theproduct streamline the installation offormwork panels.● No need for formwork removal　 All components of the products arep e r m a n e n t . N o n e e d f o r f o r m w o r kremoval after concrete solidification,but just burying them in the ground.● Can place slab concrete simultaneouslywith f　 The vertical members of panels arehighly rigid. Placing slab concretesimultaneously with footing beamconcrete are applicable with flat deckplates.● Space-saving　 The volume of materials carried in is1/7 compared with plywood panels, andthe volume carried out is zero as noneed for formwork removal.● Concrete filling conditions can bechecked　 Concrete filling conditions can bevisually checked because of the useof steel netting for formwork panels sothat quality control is easy.● Please read and understand the Technical Manual (W600)before executing or designing construction work.Cautions(1) Fix Bottom runners (No.4)on the concrete with nails.(4) Set the other side of panels(No.1) and fix them temporally.(10) Place concrete.(2) Connect/Bend panels (No.1)and set them at the proper location.(5) Pass separators throughWashers(No.7) ->panels(No.1)and battens(No.2,3) and tightenNuts(No.6) from outside.(6) Adjust the tilt of the panels.(3) Pass separators throughWashers(No.7) ->panels (No.1)and battens (No.2,3) and tightenNuts(No.6) from outside.(7) Install Top tunners(No5)with screws.(8) When srab concrete is placedat a time, install flat deck panelswith screws.Flat deck plateSeparator Type C(20mm longer than thebeam width for each end, 40mm longerin total.)(No.1) Panel(No.5) Nut (No.6) WasherNo.4No.2No.1No.5 / No.6 No.3No Component Parts Size（mm） Weight (PC) Quantity(pc/bundle) Packing1 Panel W ＝ 600 1.70（kg/m） ? ?2 Batten 3MS600 3060 2.60（kg） 20 Secured with PP strap3 Bottom Runner 2000 0.38（kg） 50 Secured with PP strap4 Top Runner 2500 0.67（kg） 50 Secured with PP strap5 Nut(set outside the panel)Distance betweenthe parallel sides: 14 0.015（kg） 2,000 nuts(500 nuts × 4 bags) Case6 Washer(set inside the panel)Distance betweenthe parallel sides: 14 0.003（kg） 4,000 nuts(200 nuts × 20 bags) Case7 Joint For φ 10 hole ? 5,000 nuts(1,000 nuts × 5 bags) CaseNote 1: The standard Hight of the Panel is 500~4,000mm. Please consult our sales person when you needtaller / shorter hight.Note 2: The product is used to receive flat deck plates, when the concrete slab is placed at the same time.Product No. B90-0410(No.2) Batten 3MS600(No.4) Top Runner(No.3) Bottom RunnerMetal Lath FormworkStay-in-place lath formwork for footing beam work90