BookTitleOkabe Product Catalog

Summary

Okabe Product Catalog

Balcony ChamferPVC chamfer for balcony gutterFeatures● Since this product is made of PVC, it is freefrom warp or twist, and formwork can becleanly removed.● After the concrete hardens, no chippingwork required for the slope or corner area ofthe balcony gutter.● Can be reused at least 10 times, whichsubstantially reduces the cost per use.● Since the product is hollow, it is lightweightand easy to carry.● Can be cut with a circular saw as necessary.The product be easily connected with theincluded joint material.● Made-To-Order available ter curved-cornersto your specifications.◆Size ◆Working method● When the cutoff width is 100mm ormore, attach plywood ①, etc.● When the cutoff depth is 40mm ormore, paste backup material ②.● For cut ends, use joint material.(1) Fasten this product to a batten with duplexhead nails, etc., as shown in the figure below.(2) After placing concrete, be sure to removethe nails first, and then take out this productbefore disassembling formwork.* Do not open formwork with a pry bar, etc.40 * For cut ends, use joint material.306040（30）=HPolyethylene foam(expansion ratio of 15 times)①②Duplex head nailBalcony Chamfer4040101006010040Standard finished dimensionNo misalignment occurs.Product Total length (m) Height H Quantity(pc/case)Balcony Chamfer H40 2 40 15　　　　　　　　 　 H30 2 30 25Curved-corner, joint materials and nail sizeCurved-corner material (universal) Joint material Duplex head nail404030302545φ2.8Polyethylene foam (expansion ratio of 15 times)Product No. B90-033088