BookTitleOkabe Product Catalog

Summary

Okabe Product Catalog

A　B　C　G　TemporaryConstructionConcreteRebar Work Formwork CivilEngineeringBeam ClampFor H-beam & φ42.7 or φ48.6 steel pipeProduct Weight(kg/pc)Quantity(pc/bag)Weight(kg/bag) PackingA-1 (Fixed) 1.04 20 20PP bagA-2 (Swivel) 1.04 20 20B-1 (Fixed) 1.04 20 20B-2 (Swivel) 1.04 20 20C (Preset Lateral) 1.80 15 22C (Preset Top or Under) 1.80 15 22◆Allowable loadFor the Lateral side of H-beamFixed / SwivelFor the Top or the Bottom side of H-beam Detachable 2-wayFixed / SwivelType A-1 Type A-2 Type B-1 Type B-2 Type CLateral side Top or Bottom side(Factory Preset)Features● Specially designed hot rolled material is used for the Ushapedpart.● The wide U-shaped part provides excellent stability.● Compact design.● The clamp can be securely fastened to a steel frame becauseof the use of high tensile cup point bolts as lockbolts.● Tightening torque for both U-shaped hardware and singleclamp is 3.43~4.41kN･cm (350~450kgf･cm).● Two beam clamps must be installed for clamping.● Regarding the common type clamp, check the tighteningof the clamp attaching bolt before using the clamp.　 [Tightening torque: 2.45kN･cm (250kgf･cm)]● Do not use the clamp in such a direction as to causeslipping or falling from the H-beam, etc.● Fit the U-shaped hardware to the H-beam etc., until fullyinserted, and tighten the U-shaped hardware.● H-beam etc., to which the clamp is attached must be6mm or more in thickness.● The applicable flange thickness is up to 32mm.● The clamp must be used within the allowable load.Cautions（When φ48.6）Parallel to push boltsAllowable load: 4.41kN（450kgf）力の方向力の方向orthogonal to push boltsAllowable load: 3.08kN（315kgf）Directionof forceDirectionof forceType A-1 / A-2 Lateralside of H-beamType B-1 / B-2 Top/Bottom side of H-beamProduct No. A10-00405