BookTitleOkabe Product Catalog

Summary

Okabe Product Catalog

● Hammer in the product to H-beam flangetill the end (* See the example.)● Do not exceed applicable flange thickness.● Please make a formwork constructionplan in compliance with the allowable load.● When making an earth retaining plan, determinethe intervals of the soldier pile consideringthe formwork construction plan.● For the poor construction accuracy ofsoldier pile, increase the attachment ofthe products.● Be sure to keep screwing thread lengthof separator to retain the strength (e.g.11.5mm or more for W5/16).● Check the rotation-stopper function byhammering the stopper hardware.● Check the product for damage before use.● Do not use the product for any purposeother than its intended purpose.● When installing the product, confirm itsspecifications and precautions, and handlethe product with sufficient care.CautionsFeatures● Flange thickness of H-beam　 (12~15mm and 19~21mm)● Can be easily hammered in a small spacebetween the soldier pile and timber lagging.● Hammering the stopper hardware preventsrotation of separator.● Soldier pile can be easily extracted.● Applicable to the SMW method as well.◆Size◆Application ◆Allowable load* Exampleof driving38（42）Ｌ（43.5）426　U-shaped hardwareStopper hardwareW5/1615Flange thicknessProduct Applicable flangethickness (mm)L（㎜）Weight(kg/pc)Quantity(pc/case)Weight(kg/case) PackingF1215L=100 12?15 96 0.22 50 11.0 CaseF1215L=150 12?15 146 0.24 50 12.0 CaseF1921L=100 19?21 96 0.22 50 11.0 CaseF1921L=150 19?21 146 0.24 50 12.0 CaseSoild cement pillarSoldier pile and timber lagging●Tensile load: 10.0kN (1,000kgf)Separator Joint：Soldier Pile Product No. B20-0040・Separator joint hardware for soldier pile・Extraction hardware for soldier pile60