BookTitleOkabe Product Catalog
- page
- 54/134
This page is an overview of Okabe Product Catalog on page54
Move to the page after second(s).
Now go to the page by clicking "Open the e-Book" button.
Summary
Okabe Product Catalog
Ladder Formwork SupportSupporting hardware for ladder formwork● Install products with spacing of 900mm or less considering theupper formwork weight.● For installation, use W5/16 plastic cones, bolts or form ties(nuts) to fasten the product at 4 positions.● Install the product vertically to the formwork.● Install plastic cones to the no-rib side (see installation method)● Be sure to place the hexagon head of the bolt in the dent, andscrew the bolt into the plastic cone.● 1 set consists of 1 Ladder Formwork support and 4 hexagonhead bolts.CautionsPacking Quantity(pc/bundle) Accessory Weight(kg/bundle)Bundle 10 Hexagon head bolt W5/16 × 40 9.0● Note that if screwing lengths of plastic cones and form ties are short, the predetermined strength cannot be secured.● Check the product for damage etc., before use.● Do not use the product for any purpose other than its intended purpose.● When installing the product, confirm its specifications and precautions, and handle with sufficient care.◆Notes for using Corner Fastener/Ladder Formwork support900mm or less 900mm or less 900mm or lessProduct No. B10-0580◆Product specification ● Allowable load: 4.90kN（ 500kgf）◆Installation method4010 96520 25 175 25 475 25 175 25φ9◆Application ● Formwork for staircase with wall◆Usage instructions ● Installation spacing 900mm or less2052