BookTitleOkabe Product Catalog

Summary

Okabe Product Catalog

Stable tensile strength.Separator Joint PocketJoint pocket for post-installation of beam work separator● Install the product with the openingface upward.● Tighten form ties and fasten the productsecurely.CautionsRightLeft sidesideType ZeroFor hat typeType AFor hat typeType BFor exposed concrete(Plastic cones,insulation pad)Type CFor finishingType ZeroFor hat type 0 －5 －20 ＋5Type AFor hat type －5 －10 －25 0Type BFor exposed concrete(Plastic cones,insulation pad)－20 －25 －40 －15Type CFor finishing ＋5 0 －15 ＋10Type Beam width Adjustment dimension Calculation formula Separator to be usedRight side Left side （mm） （mm） （mm） (Order)Type Zero Type Zero 500 ±0 500±0＝500 B-500Type Zero Type B 500 －20 500－20＝480 B-480Type A Type A 500 －10 500－10＝490 B-490Type B Type B 500 －40 500－40＝460 B-460Type C Type C 500 ＋10 500＋10＝510 B-510Product Quantity(pc/case)Weight(kg/case) PackingSeparator Joint Pocket Type Zero 250 (including nuts) 12 CaseSeparator Joint Pocket Type A 250 (including nuts) 13 CaseSeparator Joint Pocket Type B 250 (including nuts) 10 CaseSeparator Joint Pocket Type C 250 (including nuts) 11 CaseEasy and secureinstalla tion!!The maximum workingspace with the minimumproduct design.Easy and securetemporary placement.Secure tightening withthe special stopper.Type ZeroFor hat typeSeparator type B = beam width ±0Type AFor hat typeSeparator type B = beam width ?10Type BFor exposed concrete(Plastic cones, insulation pad)Separator type B = beam width ?40Type CFor finishingSeparator type B = beam width +10● Do not hammer the main body.● Make sure that the thread of separatorhas passed the stopper ( ④ ).● Do not deform the main body of thehardware. (This will cause a deteriorationof the stopper function andstrength.)●Adjustment dimension chart (mm)● Basic formula Example: Beam width of 500mm/Separator to be used: Type BInstallation methodFacing upwardPocketPlace the nut in the pocketHammer the separatorStopperStrike the Separator until it reaches the bottom. The thread is covered by the stopperSeparator installationTemporary placement of the separatorSetting completionProduct No. B10-0510◆Calculation method ◆Working method◆QuantityBasic formula: Beam width ± adjustment dimension = Separator to be usedBeam width◆Product specification　● Applicable Separator sizes: W5/16　● Allowable tensile load: 7.35kN (750kgf)46