BookTitleOkabe Product Catalog

page
21/134

This page is an overview of Okabe Product Catalog on page21
Move to the page after second(s).
Now go to the page by clicking "Open the e-Book" button.

Okabe Product Catalog

ReadBook

Open e-Book in Flash Viewer

This e-Book is not available in your environment.

Summary

Okabe Product Catalog

A B C G TemporaryConstructionConcreteRebar Work Formwork CivilEngineering[質量/0.83kg]119使用する範囲90°使用を避ける範囲SuspenderSteelbeam36mmor moreStirrupMain reinforcement37BB型140以上250以上BtA型39250以上H-Beam Scaffolding Hanging Frame:Welding-FreeNon-welded scaffolding hanging frame for H-beamハイブラケット主桁チャンネルブラケット36使用ClipStrikeSuspenderSteel beam flangeSuspenderGrip hardwareInsertW/1 ・bolt2Tightenハイブラケット主桁チャンネルブラケット[質量36使用する範囲90°使ClipStrikeSuspenderSteel beam flangeSuspenderGrip hardwareInsertW/1 ・bolt2TightenSuspenderSteelbeam36mmor moreStirrupMain reinforcement37(Fig. 1) (Fig. 2)◆How to use1. Cross the suspenders, and hitchthe grip hardware on the flange ofthe steel beam. (See Fig. 2.)2. Insert the clip into the suspenderholes which match the flange width,and lock the suspenders. (See Fig. 1)3. Tighten each bolt for the grip hardwareat the allocated positions. (See Fig. 2.)4. Install scaffolding board, handrailpipe, etc. Then, lift and install thesteel beam.● The product should be installed atintervals of 1,800mm (1,829mm)or less.● Use the right and left suspenderholes at the symmetrical positionsand lock the suspenders securelywith the clip.● Tighten the grip hardware with atightening torque of 3.43kN・cm(350kgf・cm).Cautions◆ Example of use3.13kN(320kgf)4.90kN(500kgf)19.60kN(2000kgf)◆ Allowable loadBalcony-Wall Joint ⅠU-shaped joint hardware for scaffolding & balcony wall404215 180 505030 380 905050015 180 505030 380 90500404215 75 505030 180 905030024080240 28080WW W404215 180 505030 380 905050015 180 505030 380 90500404215 75 505030 180 905030024080240 28080WW W404215 180 505030 380 905050015 180 505030 380 90500404215 75 505030 180 905030024080240 28080WW WProduct Balcony-wall Joint Ⅰ I-S Balcony-wall Joint Ⅰ I-M Balcony-wall Joint Ⅰ I-LEffective dimensions (mm) 100?205 100?205 140?245Minimum available dimension H (mm) 105 or more 210 or more 210 or moreWeight (kg) 3.8 4.6 4.8Balcony-wall Joint Ⅰ Type S Balcony-wall Joint Ⅰ Type M Balcony-wall Joint Ⅰ Type LFeatures● Attached to the balcony handrail walland serves four purposes: preventionof flying or falling objects, simplescaffolding, receiving supports (S andL types), and fixing handrail.● Lightweight and easy to carry.● P r o v i d e d w i t h r u b b e r c o v e r t oprotect the structure surface.● The clamp can be rotated freely.◆ SizeProduct No. A30-0420Product No. A30-043019