BookTitleOkabe Product Catalog

Summary

Okabe Product Catalog

Caution: Do NOT install nomore than 1 Slide Bracket betweenWall-Ties.Features● The length can be adjusted.● The grip hardware (clamp) can be used for both framescaffolding and pipe scaffolding, as it is compatible withboth φ 42.7 and φ 48.6 pipes.● To install a handrail pole, a detachable bracket clamp is available.● Do NOT install more than one Slide Bracket betweenwall-ties. (See above figure).● Tighten the bracket clamp with a tightening torque of3.43~4.41kN・cm (350~450kgf・cm). (Do not overtightenthe clamp, or the bolt will be damaged. Also, be carefulnot to forget tightening the clamp.)● For frame scaffolding, the best location to installbracket is where frame braces are.● For both frame scaffolding and pipe scaffolding, thebest location to install bracket is the closest part tothe Wall-Tie.● Be sure to use the product within the allowable load.Product L1 L2 L3 L4Slide Bracket　E500, D500 350?545 300 300 275E750, D750 530?775 480 415 320E1000, D1000 770?1025 730 415 385CautionsSlide BracketExtendable bracket for scaffolding walk boardProduct Adjustmentrange LWeight(kg/pc)Quantity(pc/bundle)Weight(kg/bundle) PackingSlide Bracket E500 350?545 3.55 5 18 Secured with ropeE750 530?775 4.65 5 23 Secured with ropeE1000 770?1025 5.94 5 30 Secured with ropeD500 350?545 3.69 5 18 Secured with ropeD750 530?775 4.87 5 24 Secured with ropeD1000 770?1025 6.30 5 32 Secured with ropeBracket clamp 0.39 50 20 CaseType E: Electroplated　　Type D: Hot dip galvanized items are made to order items.Allowable load● When the bracket is used for the auxiliary scaffolding forframe scaffolding (or pipe scaffolding), the allowable bearingcapacity of the bracket per board is up to 2.45kN (250kgf).● When the bracket is used for single row scaffolding, Lshould not exceed 600mm, and scaffolding height shouldnot exceed 15m. The allowable bearing capacity per spanper layer is up to 1.47kN (150kgf).Features● Can be used for both single rowand double row scaffolding, withclamps used at both ends of thebracket.● Easy to store and transport asthe bracket can be folded up.● Please use this productaccording to the usage instructionsfor Slide Bracket.CautionsScaffolding BracketBracket for scaffolding walk boardAllowable load● When the bracket is used for framescaffolding or pipe scaffolding,its projection length should notexceed 600mm, and imposed loadper bracket should not exceed1.47kN (150kgf).Product Weight(kg/pc)Quantity(pc/bundle)Weight(kg/bundle) PackingScaffolding Bracket 3.01 5 15 Secured with ropeDrawing viewing from AProduct No. A30-0030Product No. A30-004012