BookTitleOkabe Product Catalog

Summary

Okabe Product Catalog

A　B　C　G　TemporaryConstructionConcreteRebar Work Formwork CivilEngineering● To receive steel pipe or scaffoldingframe to place pressureresisting boardPipe Holder CupHolder cup for steel pipe or scaffolding frameAllowable load 4.90kN（500kgf）◆Spece ◆ApplicationIn case the cup is removed 　In case the cup is embedded◆How to use● Use the product within the allowable load of 4.90kN･cm (500kgf･cm). Make the load act vertically.　 (Horizontal load is not taken into consideration.)● The numerical value of the allowable load is the strength of this product.● Do not use the product under horizontal load.● After adjusting the height, be sure to tighten the locknut.● After adjusting the height, be sure to set the waterstop ring in the middle between the cup lower end and the locknut.● Be sure to place the pipe in the center of the cup.● Be sure to secure the baseplate with four concrete nails, and use the product within the applicable height mentionedabove.● When the cup is removed, lower the waterstop ring near the locknut and cure the bolt part before placing concrete.CautionsH200 H300 H500min max min max min maxDimensionsof each partＨ 170 240 230 360 340 580ｈ 130 200 190 320 300 540Ａ 95 155 265Ｂ 130 190 300Packing Case Case CaseQuantity 10 units 10 units 10 unitsWeight (Package) 9.8kg 11.4kg 14.3kg(Unit: mm)(Through hole)Water stopLocknut4 nail holeSteel Pipe φ48.6Scaffolding Frameφ42.7Remove scaffolding afterplacing concreteCuring coverPipe Holder CupLeveling concreteRemove the cup partFill the threaded hole with mortarPipe Holder CupLevelingconcreteSteel Pipe φ48.6Scaffolding Frameφ42.7Remove scaffolding afterplacing concretePipe Holder CupLevelingconcreteFill the cup with mortarPipe Holder CupLevelingconcreteProduct No. A30-002011