BookTitleOkabe Product Catalog

Summary

Okabe Product Catalog

CS Rebar Joint Product No. C10-0010Mechanical joint for rebarFeaturesCS Rebar Joint is:Mechanical joint for rebars by connecting them with a relay bolt.Applicable for rebar diamiters of D13 to D51.Compression of the sleeve is even available to the construction site.Either side is axially movable and rotatable.Either side is non-rotatable, but axially movable.■Type I■Type IIDimension◆ Working procedures◆ Working proceduresDimension* L, RL, KL, and R1 are standard dimensions obtained by calculation.* L, RL, KL, and R1 are standard dimensions obtained by calculation.Rebar Dia. M D D2 L RL KL R1 BD13 M14×2.0 21.3 24 80 53 27 54 19D16 M18×2.5 25.6 30 95 62 33 66 24D19 M20×2.5 30.1 32 102 63 39 78 27D22 M24×3.0 33.5 37 115 70 45 90 32D25 M27×3.0 39.9 43 129 83 46 92 36D29 M30×3.5 44.9 49 144 88 56 112 41D32 M33×3.5 48.2 52 155 97 58 116 46D35 M36×4.0 53.5 57 170 111 59 118 50D38 M39×4.0 57.6 61 187 121 66 132 55D41 M42×4.5 62.9 65 195 127 68 136 60D51 M52×5.0 78.5 83 243 154 89 178 75Rebar Dia. M D D2 L RL KL R1 BD13 M14×2.0 21.3 24 80 53 27 64 19D16 M18×2.5 25.6 30 95 62 33 77 24D19 M20×2.5 30.1 32 102 63 39 89 27D22 M24×3.0 33.5 37 115 70 45 102 32D25 M27×3.0 39.9 43 129 83 46 104 36D29 M30×3.5 44.9 49 144 88 56 127 41D32 M33×3.5 48.2 52 155 97 58 131 46D35 M36×4.0 53.5 57 170 111 59 133 50D38 M39×4.0 57.6 61 187 121 66 147 55D41 M42×4.5 62.9 65 195 127 68 154 60D51 M52×5.0 78.5 83 243 154 89 198 75BL1 BL16 3220 4022 4426 5230 6033 6636 7240 8043 8647 9457 114BL1 BH BL S E16 10 42 24 27.720 11 51 27 31.222 11 55 32 37.026 12 64 36 41.630 12 72 41 47.333 15 81 46 53.136 15 87 50 57.740 15 95 55 63.543 15 101 60 69.347 18 112 65 75.057 20 134 80 92.4〈mm〉〈mm〉● P o r t a b l e c r i m p i n g d e v i c e i savailable.● Jointable up to 2-size differences indiameters.● Jointable up to 1 rank difference inmaterial.● Reliable joint strength● Quick tightening with a torquewrench.● O n l y o n e - d a y t r a i n i n g s e s s i o nrequired for qualification.Type I sleeveType II sleeve(fixed)RH thread LH thread(movable)Type II boltScrew the bolt into the fixed sleeve a few threads.Screw the bolt into the movable sleeve a few threads as well.Rotate the fastening nut with a spanner, and tighten with a torquewrench.Type I sleeveType I sleeve(fixed)(movable & rotatable)Type I boltStopperScrew the bolt into the fixed sleeve till it stopsTighten with a torque wrench.Rotate the movable & rotatable sleeve to the endType I sleeveType II boltFastening nut Type II sleeve(LH thread)Hex.Hex.(Distance between rebars) Fastening nut(RH thread)RebarType I sleeve Hex.Hex.Type I bolt(Distance between rebars)Type I sleeve Rebar(RH thread) (RH thread)108